Researching a Critical Social Issue in Computerization Term Paper

Researching a Critical Social Issue in Computerization - Term Paper Example With the same inspiration, the chosen book encompasses details about the journey of technology and how it has successfully made mankind its slave rather than the opposite. Neil Postman was a technology critic, who doesn’t favor the uncontrolled growth of technology and the reliance on technology more than human intellect and judgments. His book â€Å"Technopoly† has addressed various professions ranging from medicine to education, advertising to business management etc. The current technological trends are troubling and causing impact on the lifestyle of individuals, culture, language and personal relations. Its gradual invasion has been unnoticed by many and has just been accepted as the eventual change of times. However, some people, like the author of the book, are conscious about the changes and try to repel them as much as possible to ensure that they are not overpowered by it. The book stresses on few main adverse effects that have been discussed in the paper. B. Main Concepts from the Book The book explains the gradual technological changes that have taken place in the history of mankind; the main factors that are considered harmful by Neil Postman are: Effects on cultural values Effects on human intellect Effects on social capabilities These three aspects are very important as they effect the social and mental development of humans, alongside the morals and traditions of societies. The power of technology overpowers the intellect of humans, changes cultural values and reduces the need for personal relations. These effects will be discussed in detail in the later sections of the report. These changes have not been sudden. On the contrary, man has witnessed varying degrees of integration of technology with the passage of the years. The author termed these changes as â€Å"ecological† i.e. the original form of something is altered due to some change. The author categorizes the changes into three main eras; tool-using culture, technocra cy and technopoly. Tool-using culture has been defined as the era in which tools were invented to solve problems. The tools did not threaten the cultures, traditions and mental capabilities of humans. Technocracy saw the integration of technology in the lives of the individuals; however industrialism and technical incorporation were still not strong enough to drive away culture, language and morals. Technopoly is explained as the prevailing era in which technology has overpowered human intellect as machines are considered more reliable than humans. It is due to the technological integration in the society that machines are considered more dependable than humans. 1. Effects on human intellect The advent of scientific management took place in 1911 by Frederick Taylor. The principles of scientific management were originally developed for the production processes in industries but soon the respective concept intervened in the whole society and started being followed religiously by peopl e who weren’t even a part of the industrial sector. Scientific management provoked the employees to perform their jobs strictly according to the rules and laws that had been laid down for their specific positions. This created the dependence on technology and freed the people from the responsibility of thinking creatively and making

Responding to Global Warming Term Paper Example | Topics and Well Written Essays - 4000 words

Responding to Global Warming - Term Paper Example The political factors have an enormous power over the regulations governing the retail business along with the control on the spending power of the consumer, the control over monopoly of a single large retailer in the market and the availability of such retail services to most customers situated across the country. The following issues or political factors can be looked upon as either threat or opportunity for Tesco in the next ten years: Stability of the political environment –Threat and Opportunity - A government in power will formalize rules governing the business of Tesco and the influence that Tesco will have over a government, as an environmentally friendly business. Government’s position on marketing ethics– Threat and Opportunity – The rules laid down by the government to make a business more environmentally friendly will have a profound effect on the money spent to be more environmentally compliant. However, this would also ensure that Tesco gains advantage by advertising its efforts to help global warming cause through advertisements and thus, gain popularity. Trading agreement of Tesco with other countries – Threat – Given the global nature of Tesco’s business, the different laws laid down by different Governments such as EU, NAFTA, ASEAN etc, can hamper the uniformity of Tesco’s policies for being environmentally friendly. The economic factors are the most vital ingredient for the success of a business. Marketers need to consider the state of a trading economy in the short and long terms, especially for planning international marketing. The issues of interest rates, a rate of inflation, employment level per capita, the long-term prospects for the economy Gross Domestic product per capita, etc, can all affect the revenue of a company and thus the budgetary allocation on adopting environmental friendly methods of business. Thus, the economic factors can be looked upon as threats and as well as opportunities.

Rhetorical Analysis on Jfks Speech Essay Example for Free

Rhetorical Analysis on Jfks Speech Essay On august 28, 1963, a civil right activist Dr. Martin Luther King Jr. delivered his most famous speech called â€Å"I Have a Dream† during the march on Washington. In his speech, Dr. King used many literary elements in order to enhance his speech. He included allusion, metaphors, personification and tropes such as anaphora, alliteration and rhetoric question. Dr. Martin Luther King began his speech with a personifications and metaphors. The first personification he used to describe what it was like to live as an African American during the 1900’s. He stated â€Å"One hundred years later the life of the Negro is still sadly crippled by the manacles of segregation and the chains of discrimination,† which means the African American (Negro) were handcuffed by the segregation and no matter what they do or how smart they are, they will never be able to escape segregation and they are chained by the discrimination. This discrimination won’t let them do what they are capable of doing. The metaphor is used in the speech to compare the African Race to a bad check, â€Å"insufficient fund.† When the slavery ended in America, the African American hoped to cash the check of freedom, when the magnificent words flow from the Constitution and the Declaration of Independence, but instead to honoring the words, American gave the African the â€Å"bad check† which eventually come back as insufficient fund. As the speech goes on, he used a paradox to show the contradiction. This quote, â€Å"I have dream that one day this nation will rise up and live out the true meaning of its creed:’ we hold these truths to be elf-evident: that all men are created equal,’† is a perfect example of paradox because in the constitution, its states that all men are created equal and even though the constitution is consider to be the supreme law of the land, people chose to ignore it. He used anaphora to emphasize that he dreams about, to live in American without the segregation and the hostile feeling between the White and the African American. The use of rhetoric question, help readers and listeners to think of their own answer. In the speech, Dr. Martin Luther King Jr. gave his own Rhetoric question and his answer to the question. â€Å"When will you be satisfied?† he asked, and he answered â€Å"we can never be satisfied as long as the Negro is the victim of the unspeakable horrors of police brutality,† he would never be satisfied until the African American  and White hold hands and recite the National Anthem. Adding the subtle or an obvious element can improve any piece of writing tremendously. They can give the text that hunting feeling, where the goosebumps start crawling into your skins. The elements used in Dr. Martin Luther King Jr.’s speech helped the speech into becoming one of the most influential speech written in the world.

Literature Review on Contractual Issues Arising Claims

Literature Review on Contractual Issues Arising Claims Avoiding construction claims and disputes requires understanding of the contractual terms, early no adversarial communication, and understanding of causes of claims.(Cheryl Semple, Francis T. Hartman, and George Jergeas) identify some of the critical element in construction contract, and investigates the causes of claims, categories of compensation of claims and contract clauses quoted in claims by studying high-rise apartment building and institutional buildings. Construction contract determines the basis for the relationship between the parties involved in it. A contract is a promise or agreement that the law will enforce. Construction contract are very often long, complex document, consequently, disagreement or disputes can arise regarding contractual obligations or expectations, when one party feels that the contractual obligations or expectations have not been meet and they fell that they deserve monetary and/or time compensation they may submit a claim. A claim is defined as an assertation to the right to remedy, relief or property (Canadian Law Directory) Currently construction industry in UAE has number of disputes arrives because of disputed in legal document and poor coordination in general and particular condition of contract. UAE is fast growing country in terms of construction and lots of competition for getting the project because of that contractors are bidding less and claiming more amounts. A client tries to reduce the over all cost of project and contractors tries to get more profit and result is disputes arise. Every claim submitted by the contractor puts presser on client and consequently it affect increasing property price. That is why construction claim are considered as the most unpleasant event in construction industry. Claims can be reduced by proper arrangement of scope of work in contract document. Contract is the document which explains all rolls and liabilities of the parties involved in it. For the purpose of study for analyzing contractual issues literature review is divided in two parts. First part will discus s on Contract law in general and particular terms used in formation of construction contract. Second chapter will discuss on Claims under FIDIC contract and previous research in claims. 1 Introduction to contract law 1.1 Legal systems A legal system, is a system for identifying factual situations where the state will impose sanctions on a person (criminal law), where one person can seek redress from another person (civil law), and where a person can challenge decisions of the state and public bodies, such as local authorities (administrative law)1. For example: If someone takes property belonging to another with the intention of permanently depriving them of that property, this is categorized by the criminal law as a crime (theft) for which the state can seek an order for imprisonment, a fine or both. The same conduct is categorized by the civil law as a tort (known as conversion) for which the person whose property is taken can seek an order requiring the person taking the property to return it, to pay compensation (damages), or both. If the property is taken by the state or a public body in wrongful exercise of a statutory or other power, the decision to do so can be challenged in administrative law by seeking a declaration that it is invalid and should be reconsidered. 1.2 Criminal, civil and administrative law The criminal law is principally concerned with the imposition of fines and imprisonment sought by the state against persons. The civil law is concerned with awarding compensation and making orders in favor of one person against another. Administrative law is principally concerned with making orders concerning the administrative actions of the state and public bodies. 1.3 Obtaining redress The usual means of obtaining redress is in a court of law. The criminal courts, primarily the Magistrates Courts and the Crown Court, are concerned with redress in respect of criminal matters .The civil courts, primarily the County Courts and the High Court, are concerned with redress regarding civil claims. In many countries, a separate court is established to deal with claims concerning the administrative actions of the state and public bodies, but this is not the case in everywhere, where administrative law matters are dealt with by the High Court. The courts are not the only means of obtaining redress in many civil matters. 1.4 The civil law of obligations Each of the principal divisions of law criminal law, civil law and administrative law contains numerous subdivisions. The subdivision that is relevant to this publication, and to the series of which it forms part, is that part of the civil law concerned with the law of obligations. 1.5 Obligations in contract and tort The law of obligations has, in turn, two parts: the law of contract and the law of torts. In the law of contract, a persons obligations are primarily founded on agreement and are, in general, owed only to the other party to the agreement, not to persons generally. Because obligations owed in contract are founded on agreement, they can be as prescriptive and detailed as the parties wish and their agreement requires. For example, agreed obligations can concern the development of an office block in accordance with detailed requirements, or the structuring of a long-term business relationship, such as a partnership. It would be impossible to regulate such relationships using only the law of torts, since obligations in tort are too generalized. In the law of torts, a persons obligations are primarily determined by general principles of law and are, ordinarily, owed to persons generally. Since obligations owed in tort are imposed as part of the general law, they are expressed in the form o f general standards of conduct. For example: the obligation to exercise reasonable skill and care so as not to cause injury or damage to others forms the basis of the tort of negligence; the obligation not to unreasonably interfere with a persons use or enjoyment of their land forms the basis of the tort of nuisance. Both parts of the law of obligations are significant for the construction industry. Work on a building project, such as the provision of consultant services, construction or materials, will ordinarily be carried out under a contract since this is the only way that obligations having the required definition and precision can be given legal force. But the work provided may, if defective, cause damage not only to the person with whom those obligations are agreed but to others, such as adjacent landowners, users and subsequent owners of the project. While the person or persons with whom the contract is made will, ordinarily, be able to seek redress in the law of contract, t hose who are not parties to that contract will have to seek redress in the law of torts. The law of contract is of fundamental importance for the construction industry because the contract is the principal vehicle for those working on a project to be engaged, their obligations are regulated and redress assessed if things go wrong. The law of torts has a subsidiary importance if things do go wrong. 1.6 Rights and obligations The law is often discussed in terms of obligations, there is, in general, for each obligation a corresponding right .Thus, an obligation not to unreasonably interfere with a persons use or enjoyment of land can be seen, from the perspective of a landowner, as a right to enjoy and use their land free from such unreasonable interference. An obligation to perform the terms of an agreement can be viewed from the other partys perspective as a right to have those obligations performed. In contract law, these rights and obligations are often referred to as the benefits and burdens of the contract. 1.7 Defining a contract There are various definitions that attempt to encapsulate the essential nature of a contract. The definition that is most readily understandable in a commercial context is that a contract is an agreement that gives rise to obligations, and corresponding rights, that the law will recognize and enforce. Since a contract is founded on agreement, the parties are free, within wide limits, to agree the obligations to which they wish to be bound. This is known as the doctrine of freedom of contract. It means, at any rate in a commercial context, that the parties to a contract will ordinarily be bound by the agreement they make, however inappropriate, one sided or even ruinous that agreement may turn out to be for one of them. The corollary of the doctrine of freedom of contract is that a person cannot be forced to contract. In a commercial context this means that, if terms cannot be agreed, either party to the negotiations can walk away, however inconvenient or costly, in terms of wasted time and money, this is for the other party. It may be possible to break off negotiations and walk away even if work has commenced in anticipation of a proposed contract. Once a contract is concluded, it binds the parties in law. If a party to a contract fails to comply with its obligations under the contract, the other can seek redress for that failure. This can be done, as appropriate, by enforcing a right to payment (a claim in debt), by seeking financial compensation for losses suffered as a result of the failure (a claim in damages for breach of contract) or, in certain circumstances where financial compensation does not provide adequate redress, by an order that the defaulting party perform its obligations (a claim for specific performance) or stop acting in breach of its obligations (an injunction). For example, if a consultant fails to perform services he or she has contracted to provide, the client can seek damages based on the additional cost of obtaining substitute performance from another consultant. If an employer fails to pay for work provided by a contractor, the contractor can recover that payment as a debt. If a person contracts to se ll land, such as an office or house, but refuses to complete the sale, the purchaser can seek an order that the land be conveyed to it. 1.8 Categories of contract The categories of contract is most relevant to the construction industry include the following. Contracts made by deed and simple contracts (the rest). Contracts entered into by deed do not require consideration; simple contracts do. For example, a promise of a gift will be contractually binding only if it is given by deed. Contracts made by deed also attract a longer limitation period (the period during which proceedings for redress must ordinarily commence) than simple contracts. The period is 12 years from breach for contracts made by deed, 6 years from breach for simple contracts. Contracts for estates or interests in land (such as a contract for the sale or lease of a house or office). Such contracts are governed by the Law of Property Acts and related legislation and by that branch of the law known as the law of real property. Most of such contracts are subject to the code for payment and dispute resolution provided for in that Act. Arbitration agreements (an agreement that provides that disputes will be determined by a private tribunal sitting as arbitrator, not by the court). Such agreements are subject to the detailed code set out in the Arbitration Act 1996. Consumer contracts (certain categories of contract, principally contracts for goods, for work and materials and for services where one of the parties is contracting for purposes that are outside the scope of its business, if any, and the other is contracting in the course of a business). Such contracts are subject to various statutory controls that may invalidate certain types of unfair or unreasonable terms imposed to the determent of the consumer. 1.9 The importance of contracts in the construction industry: Contract is only the forming agreements that are recognized as binding by the law of contract that the parties can regulate their rights and obligations in the knowledge that these rights and obligations can, if necessary, be enforced. Given the importance of contract law in structuring commercial relations, it is surprising that those procuring and providing work in the construction industry often deal inadequately with the formation of their contracts. This leads not only to uncertainties about what was agreed and when, but also to disputes about whether a binding agreement was concluded at all and whether legally enforceable obligations are created to provide work or to pay for it. Such disputes can arise during the work as well as after it is completed. 1.10 Contractual terms used in formation of contract The obligations that the parties accept when they conclude a contract are contained in its terms. The terms may be express or implied or, more usually, a combination of both. 1.10.1 Express terms Express terms are those that the parties expressly state when making their contract. Express terms may be written or oral. Oral terms may be evidenced in writing. * Written terms set out in documents forming the contract for example, where a client and builder execute a copy of a standard form building contract, such as a copy of the FIDIC condition of contract setting out all of the terms they have agreed, or where, as is often the case in a contract for the sale of goods, all of the terms are set out in a letter of offer, accepted by the purchaser orally or by conduct. * Written terms contained in documents referred to (incorporated by reference) in the exchange of communications forming the contract * Oral terms agreed at a meeting or over the telephone. It is preferable for oral terms to be recorded (evidenced) in writing so that there can be no dispute about what was said, for instance by making and circulating a note of what was agreed. But failure to do this will not affect the validity of such terms, unless the contract is of a type whose terms must be made or evidenced in writing. 1.10.2 Implied terms Implied terms are those that are included in a contract even if the parties do not expressly refer to them at the time the contract is concluded. * Contract terms are implied by law or by statute if the contract is of a type in which such terms are ordinarily implied and the implication of those terms is not contrary to the express terms of the contract. For example, terms are ordinarily implied by the Sale of Goods Acts into contracts for the sale of goods, and by the Supply of Goods and Services Acts and law into contracts for work and materials or for services. * Terms implied to reflect the parties presumed intention if, having regard to the words used in the contract and the circumstances at the time it was concluded, they are necessary to give business efficacy to the contract or are so obviously a part of the contract that both parties would, if asked at the time, have said that they go without saying. For example, a contract to use a wharf will be subject to an implied term that it is safe for the ship to lie at that wharf. But a term will not be implied on this basis if it is inconsistent with the express words of the contract. * Terms may be implied by custom where the custom is a certain and general incident of a particular trade or place, and the use of the term is well known, reasonable and not contrary to law or to the express words of the contract. * Contract terms implied by course of dealing where the parties have contracted on the same terms on a number of previous occasions and they make another contract of similar type without expressly referring to those terms. 1.10.3 Exemption clauses An exemption clause is a contract term by which one party, usually but not invariably the party proposing the terms of contract, seeks to avoid or exempt itself from what would otherwise be its obligations or liability under the contract (an exclusion clause), or seeks to restrict or limit its liability in some way (a limitation clause).An exemption clause can work indirectly by, for instance, restricting the enforcement of obligations under a contract, or by making enforcement unusually onerous. Exemption clauses are commonly found in standard terms of business. For example, a seller of goods may seek to limit its obligations by providing in its standard terms that they form the whole agreement of the parties, and no terms are to be implied at law. The purpose of such wording is to exclude the implied terms of quality and title that would otherwise apply to the contract. A consultant provides in its terms of appointment that any liability, whether for default under the contract or in negligence, is limited to a specific sum. The purpose of such a provision is to cap the consultants potential liability to its client. Because exemption clauses exclude or limit what would otherwise be a partys obligations or liabilities under a contract, they must be clearly incorporated and clearly worded if they are to be effective. There are also various statutory controls over the effectiveness of such provisions, and, in a few instances, criminal sanctions are imposed on those who seek to include such clauses in their contracts. 1.11 Most Commonly Used Types of contract in UAE construction industry There are various types of conditions of contracts used all over the world. Most commonly used conditions of contracts in the past are FIDIC in Middle East JCT NEC in United Kingdom. In United Kingdom mainly JCT NEC conditions of contract is in practice in various forms. The conditions of contracts are listing the legal structure to be refereed to in case of any dispute or ambiguity arises. It also establishes a common basis to both the contractor and the client in understanding each partys commitments and rights against the other party. Understanding the rights and obligations are important prior to the agreement of a contract between the parties. 1.12 Key contract clauses used in condition of contract 1.12.1 Audit This clause typically outlines an owners right to perform reviews (audits) of contractor costs or records. Such clauses ordinarily outline what costs or records are subject to audit, when and under what circumstances. In cost plus contract this clause is very useful to client to restrict the overall project cost 1.12.2 Changes This clause is critical. This is the clause that allows the owner to direct changes to the work, including plans, specifications, and time of performance, means, and methods. Absent a change clause, an owner is precluded from making changes to the work. Of particular importance in this clause is whether the clause allows the owner to unilaterally direct changes to the work (in which case, if the contractor refuses to comply with the directives, they are in breach of the contract). Alternatively, the clause requires the owner and the contractor to mutually agree on the change (a bilateral change). On the other hand if there has been any discrepancy in specification or drawing this clause will help contractually to change this discrepancy with required adjustments. However changes can result positive or negative variation in construction industry. 1.12.3 Contractor Responsibilities This clause lays out, in general form, the duties, obligations and responsibilities of the contractor in performance of the work. This clause assigns specific risks to the contractor, including customarily the risk of adequate labor and equipment to accomplish the work within the required timeframe, the obligation to perform work safely, to perform work in strict accordance with the terms and conditions of the plans and specifications, and to be responsible for the work of subcontractors and suppliers, etc. This clause is very important in construction for clients points of view. As such client investing a large amount of money in the project so because of this clause he will get relief and guaranty for the works which has to be executed. 1.12.4 Delays This is, ordinarily, a risk allocation clause with respect to delays in the work. â€Å"Excusable delay† under a contract results in time extensions but no time related damages. That is, a contractors performance time is extended because of excusable delay situation, but the contract is not entitled to collect time extension costs nor is the owner entitled to impose late completion damages for this time. â€Å"Compensable delay†, on the other hand, results in both a time extension as well a time excusable and compensable to the contractor while contractor caused delay is the responsibility of the contractor (to either make up the lost time or pay the contractually stipulate late completion damages). Third-party caused delay (sometimes referred to as force majeure delay) is, most often, excusable and no compensable to the contractor. 1.12.5 Differing Site Conditions or Changed Conditions This clause normally provides an equitable adjustment to the contract in the event the contractor encounters a materially different condition at the site during performance of the work. This is the clause which will give relief to the contractor when he will get differ in site condition e.g. Non stop rain for few month. Differing site conditions are unforcing events no one can predict these events. In this situation this clause is very important in construction industry to restrict unnecessary claims 1.12.6 Dispute Resolution This clause customarily sets forth the mechanism to resolve disputes during the performance of the work. Most dispute clauses contain some form of a stepped resolution system. For example, the clause may require on site negotiation between project managers, followed by an appeal to project executives, followed by 3 days of mediation, followed by binding arbitration under a formal set of rules. Often, the location (jurisdiction) of the disputes resolution will be set forth. In construction industry there are several methods of dispute resolution like negotiation, mediation, Conciliation natural evaluation, adjudication, arbitration, and litigation. However each of then having its own framework to resolve the dispute. These are the primary steps of resolving the the disputes on claims in construction industry. 1.12.7 Force Majeure Some contracts contain a force majeure clause or a clause dealing with delays to the work caused by unforeseeable events beyond the control of both the owner and the contractor. Such clauses often provide lists of examples of force majeure events acts of God, acts of the government, civil disorder, acts of war, adverse weather, fires, floods, strikes, etc. Other contracts provide for such events in the excusable delay clause. In construction to get the relief to the parties involved in the contract from the unforeseen event. This will help to gain loss or expense due to unforeseen event. 1.12.8 Governing Law The contracts involve parties from differing locations with subcontractors and suppliers from even more locations. Accordingly, contracts often specify which law applies to a dispute, regardless of where the dispute is handled. 1.12.9 Indemnification To indemnify another is to protect them against loss or damage either by paying for the loss or standing in their place in the event of legal dispute. An indemnification clause in a contract typically requires a contractor to indemnify the owner against all loss resulting from contractor errors, omissions, accidents, third party property damages in construction industry. 1.12.10 Insurance This clause requiring the owners and contractors to furnish multiple insurance policies prior to commencing work, among which are the following: builders risk/all risk; workmans compensation; automobile, aircraft, and/or marine liability; general liability; bodily injury; broad form property damage; completed operations; personal injury; etc. Generally in UAE construction industry Third party insurance and professional indemnity insurance are covered in the contract document. 1.12.11 Late Completion Damages This clause specifies the damages for late completion. In general terms, there are two types of late completion damages actual and liquidated. Actual damages are those damages an owner actually suffers when a contract is completed late and may include loss of revenue, increased engineering, architectural or inspection services, increased financing costs etc. Liquidated damages, on the other hand, is a pre-agreed upon amount the contractor will pay the owner in the event the project is completed late due to no excusable delay cause-that is, due solely to the contractors fault. Such damages are typically expressed in terms of a daily cost and need not be proven as actually incurred if the project is completed late. 1.12.12 Limitation of liability In order to cap (or limit) a contractors risk from late completion damages, performance penalties, etc., under a contract, many contracts contain a clause limiting maximum liability to a percentage of the value of the contract. However this clause is very important UAE construction industry. UAE is fast growing country and maximum contracts are on lump-sum basis. Contractors have to bear all risk involved in the construction. 1.12.13 Order of Precedence This clause intended to provide guidance to both the owner and the contractor in the event of conflicting provisions. Typically, specifications have precedence over general provisions, and so on and so forth. The legal concept is to provide guidance to people on projects in the event there are two or more conflicting provisions relating to a topic. In UAE construction industry most preferable contract is FIDIC and the order of precedence used is Contract document, ant amendment to contract document, drawing, specification and Bill of Quantity. However if any disputes arises the above mentioned order is used to settle the disputes in construction 1.12.14 Owner Responsibilities Similar to a contractor responsibility clause, an owner responsibility clause ordinarily sets forth the obligations of the project owner, including adequate project financing, all required and necessary permits, appropriate site access, etc. These are the responsibilities covered in the contract document to run the project without any disturbance from the client/owner side. These clauses bound the owner in contractual framework to take any action during the execution of works 1.12.15 Payments This is key contract clause in terms of project cash flow. This clause sets forth how often the contractor is to be paid, in what manner, and what are the conditions precedents to the issuance of payment. In construction it helps the contractor to manage the finance before the commencement of project. 1.12.16 Quantity Variations The contracts contain estimated quantities to be installed. In the event as-bid quantity estimates vary substantially (+/- 10 percent or more) many contracts (both unit price and lump sum) contain a quantity variation clause which allows either the owner or the contractor to request a predetermination of the as-bid unit price on affected portions of the work. 1.12.17 Schedules A schedule clause typically sets forth the requirement for contractor scheduled , including format (bar chart vs. CPM), level of detail, submittal requirements, frequency of schedule updating, damages for failure to submit, delay or time extension analysis requirement, actions to be taken in the events of forecasted late schedule, etc. 1.12.18 Suspension of Work This clause habitually allows a project owner to suspend or stop all or some of the work, with or without clause. Such clauses normally provide for some adjustment to the terms of the contract in such events, including a time extension and payment of delay costs. However, recovery of time and cost limited by the terms of contract. Often, if the actual clause of the suspension order is something for which the contractor is responsible (i.e., unsafe work conditions, work not in compliance with contract requirement, etc.) no recovery time or cost is allowed. This clause gives the owner choice to delete the some or whole part of work with legal manner 1.12.19 Termination Almost all contracts have a provision allowing the owner to end, in whole or in part, performance of the work prior to project completion. There are, typically, two types of termination; termination for convenience and termination for default. Termination for convenience usually occurs when a project owner decides, for their own reasons, not to complete the project as designed. Such situations might arise if the owners needs change, if project financing fails, or if the underlying project economics change substantially. In such a circumstance, the owner may elect to terminate the contractors performance for the convenience of the owner and pay off the contractor in accordance with the terms of the clause. Termination for default arises only when a contractor is found to be in material breach of the contract, has been provided with a cure notice form the owner outlining the material breach, and has failed to remedy the breach in a timely manner. Usually the owner will terminate the co ntractor from the project and call upon the contractors financial guarantees to complete the work (i.e., letter of credit or surety bond). Some contracts also provide a contractor the right to terminate their participation in a project. Under certain carefully proscribed circumstances (such as, failure to make payments, bankruptcy of the owner, suspension of the work for more than a defined period of time, etc.) the contractor is allowed to terminate their own involvement in the project. 1.12.20 Time of the Essence/Time of Performance- Timely project completion is normally important, most contracts contain a clause stating that â€Å"Time is of the essence of this contract. â€Å"Such a clause must be included to make enforceable a time of performance clause and collection of late completion damages. Absent such a clause, the time of project completion is considered unenforceable. The time of performance clause, typically expressed either in work or calendar days after issuance of notice to precede, sets froth when the work must be completed and the consequences of failure to meet these dates. 1.12.21 Warranty A warranty clause, which ordinarily continues in existence for some specified period of time after project completion, guarantees the contractors work after project acceptance. It is not uncommon for warranty clauses to require a warranty for 1 year after project completion, during which time, if any portion of the project fails, the contractor is obligated to return to the project and make it right or agree to some commercial settlement of the issue. 1.13 Strengths and Weaknesses of contract in construction industry Various advantages and disadvantages in the usage of contracts. The contracts are imposing a better control over the contractors and always state the penalties for non-compliance. Punishment used as a tool for guidance of the projects for timely completion and it is not working always successfully. 1.13.1 Strengths * Firmly laid down rules and regulations Rules and regulations are made up to follow the instruction in the same way contract provides rules and regulation for the parties. It provides instruction to the parties what should have to be done at each stage of the projects. Such as health and safety requirement in document for each construction project. * Pre agreed procedural commitments Contract includes the procedure which should have to follow by the parties involved in it. It provides what should be done by the parties in the initial stage of the proj Literature Review on Contractual Issues Arising Claims Literature Review on Contractual Issues Arising Claims Avoiding construction claims and disputes requires understanding of the contractual terms, early no adversarial communication, and understanding of causes of claims.(Cheryl Semple, Francis T. Hartman, and George Jergeas) identify some of the critical element in construction contract, and investigates the causes of claims, categories of compensation of claims and contract clauses quoted in claims by studying high-rise apartment building and institutional buildings. Construction contract determines the basis for the relationship between the parties involved in it. A contract is a promise or agreement that the law will enforce. Construction contract are very often long, complex document, consequently, disagreement or disputes can arise regarding contractual obligations or expectations, when one party feels that the contractual obligations or expectations have not been meet and they fell that they deserve monetary and/or time compensation they may submit a claim. A claim is defined as an assertation to the right to remedy, relief or property (Canadian Law Directory) Currently construction industry in UAE has number of disputes arrives because of disputed in legal document and poor coordination in general and particular condition of contract. UAE is fast growing country in terms of construction and lots of competition for getting the project because of that contractors are bidding less and claiming more amounts. A client tries to reduce the over all cost of project and contractors tries to get more profit and result is disputes arise. Every claim submitted by the contractor puts presser on client and consequently it affect increasing property price. That is why construction claim are considered as the most unpleasant event in construction industry. Claims can be reduced by proper arrangement of scope of work in contract document. Contract is the document which explains all rolls and liabilities of the parties involved in it. For the purpose of study for analyzing contractual issues literature review is divided in two parts. First part will discus s on Contract law in general and particular terms used in formation of construction contract. Second chapter will discuss on Claims under FIDIC contract and previous research in claims. 1 Introduction to contract law 1.1 Legal systems A legal system, is a system for identifying factual situations where the state will impose sanctions on a person (criminal law), where one person can seek redress from another person (civil law), and where a person can challenge decisions of the state and public bodies, such as local authorities (administrative law)1. For example: If someone takes property belonging to another with the intention of permanently depriving them of that property, this is categorized by the criminal law as a crime (theft) for which the state can seek an order for imprisonment, a fine or both. The same conduct is categorized by the civil law as a tort (known as conversion) for which the person whose property is taken can seek an order requiring the person taking the property to return it, to pay compensation (damages), or both. If the property is taken by the state or a public body in wrongful exercise of a statutory or other power, the decision to do so can be challenged in administrative law by seeking a declaration that it is invalid and should be reconsidered. 1.2 Criminal, civil and administrative law The criminal law is principally concerned with the imposition of fines and imprisonment sought by the state against persons. The civil law is concerned with awarding compensation and making orders in favor of one person against another. Administrative law is principally concerned with making orders concerning the administrative actions of the state and public bodies. 1.3 Obtaining redress The usual means of obtaining redress is in a court of law. The criminal courts, primarily the Magistrates Courts and the Crown Court, are concerned with redress in respect of criminal matters .The civil courts, primarily the County Courts and the High Court, are concerned with redress regarding civil claims. In many countries, a separate court is established to deal with claims concerning the administrative actions of the state and public bodies, but this is not the case in everywhere, where administrative law matters are dealt with by the High Court. The courts are not the only means of obtaining redress in many civil matters. 1.4 The civil law of obligations Each of the principal divisions of law criminal law, civil law and administrative law contains numerous subdivisions. The subdivision that is relevant to this publication, and to the series of which it forms part, is that part of the civil law concerned with the law of obligations. 1.5 Obligations in contract and tort The law of obligations has, in turn, two parts: the law of contract and the law of torts. In the law of contract, a persons obligations are primarily founded on agreement and are, in general, owed only to the other party to the agreement, not to persons generally. Because obligations owed in contract are founded on agreement, they can be as prescriptive and detailed as the parties wish and their agreement requires. For example, agreed obligations can concern the development of an office block in accordance with detailed requirements, or the structuring of a long-term business relationship, such as a partnership. It would be impossible to regulate such relationships using only the law of torts, since obligations in tort are too generalized. In the law of torts, a persons obligations are primarily determined by general principles of law and are, ordinarily, owed to persons generally. Since obligations owed in tort are imposed as part of the general law, they are expressed in the form o f general standards of conduct. For example: the obligation to exercise reasonable skill and care so as not to cause injury or damage to others forms the basis of the tort of negligence; the obligation not to unreasonably interfere with a persons use or enjoyment of their land forms the basis of the tort of nuisance. Both parts of the law of obligations are significant for the construction industry. Work on a building project, such as the provision of consultant services, construction or materials, will ordinarily be carried out under a contract since this is the only way that obligations having the required definition and precision can be given legal force. But the work provided may, if defective, cause damage not only to the person with whom those obligations are agreed but to others, such as adjacent landowners, users and subsequent owners of the project. While the person or persons with whom the contract is made will, ordinarily, be able to seek redress in the law of contract, t hose who are not parties to that contract will have to seek redress in the law of torts. The law of contract is of fundamental importance for the construction industry because the contract is the principal vehicle for those working on a project to be engaged, their obligations are regulated and redress assessed if things go wrong. The law of torts has a subsidiary importance if things do go wrong. 1.6 Rights and obligations The law is often discussed in terms of obligations, there is, in general, for each obligation a corresponding right .Thus, an obligation not to unreasonably interfere with a persons use or enjoyment of land can be seen, from the perspective of a landowner, as a right to enjoy and use their land free from such unreasonable interference. An obligation to perform the terms of an agreement can be viewed from the other partys perspective as a right to have those obligations performed. In contract law, these rights and obligations are often referred to as the benefits and burdens of the contract. 1.7 Defining a contract There are various definitions that attempt to encapsulate the essential nature of a contract. The definition that is most readily understandable in a commercial context is that a contract is an agreement that gives rise to obligations, and corresponding rights, that the law will recognize and enforce. Since a contract is founded on agreement, the parties are free, within wide limits, to agree the obligations to which they wish to be bound. This is known as the doctrine of freedom of contract. It means, at any rate in a commercial context, that the parties to a contract will ordinarily be bound by the agreement they make, however inappropriate, one sided or even ruinous that agreement may turn out to be for one of them. The corollary of the doctrine of freedom of contract is that a person cannot be forced to contract. In a commercial context this means that, if terms cannot be agreed, either party to the negotiations can walk away, however inconvenient or costly, in terms of wasted time and money, this is for the other party. It may be possible to break off negotiations and walk away even if work has commenced in anticipation of a proposed contract. Once a contract is concluded, it binds the parties in law. If a party to a contract fails to comply with its obligations under the contract, the other can seek redress for that failure. This can be done, as appropriate, by enforcing a right to payment (a claim in debt), by seeking financial compensation for losses suffered as a result of the failure (a claim in damages for breach of contract) or, in certain circumstances where financial compensation does not provide adequate redress, by an order that the defaulting party perform its obligations (a claim for specific performance) or stop acting in breach of its obligations (an injunction). For example, if a consultant fails to perform services he or she has contracted to provide, the client can seek damages based on the additional cost of obtaining substitute performance from another consultant. If an employer fails to pay for work provided by a contractor, the contractor can recover that payment as a debt. If a person contracts to se ll land, such as an office or house, but refuses to complete the sale, the purchaser can seek an order that the land be conveyed to it. 1.8 Categories of contract The categories of contract is most relevant to the construction industry include the following. Contracts made by deed and simple contracts (the rest). Contracts entered into by deed do not require consideration; simple contracts do. For example, a promise of a gift will be contractually binding only if it is given by deed. Contracts made by deed also attract a longer limitation period (the period during which proceedings for redress must ordinarily commence) than simple contracts. The period is 12 years from breach for contracts made by deed, 6 years from breach for simple contracts. Contracts for estates or interests in land (such as a contract for the sale or lease of a house or office). Such contracts are governed by the Law of Property Acts and related legislation and by that branch of the law known as the law of real property. Most of such contracts are subject to the code for payment and dispute resolution provided for in that Act. Arbitration agreements (an agreement that provides that disputes will be determined by a private tribunal sitting as arbitrator, not by the court). Such agreements are subject to the detailed code set out in the Arbitration Act 1996. Consumer contracts (certain categories of contract, principally contracts for goods, for work and materials and for services where one of the parties is contracting for purposes that are outside the scope of its business, if any, and the other is contracting in the course of a business). Such contracts are subject to various statutory controls that may invalidate certain types of unfair or unreasonable terms imposed to the determent of the consumer. 1.9 The importance of contracts in the construction industry: Contract is only the forming agreements that are recognized as binding by the law of contract that the parties can regulate their rights and obligations in the knowledge that these rights and obligations can, if necessary, be enforced. Given the importance of contract law in structuring commercial relations, it is surprising that those procuring and providing work in the construction industry often deal inadequately with the formation of their contracts. This leads not only to uncertainties about what was agreed and when, but also to disputes about whether a binding agreement was concluded at all and whether legally enforceable obligations are created to provide work or to pay for it. Such disputes can arise during the work as well as after it is completed. 1.10 Contractual terms used in formation of contract The obligations that the parties accept when they conclude a contract are contained in its terms. The terms may be express or implied or, more usually, a combination of both. 1.10.1 Express terms Express terms are those that the parties expressly state when making their contract. Express terms may be written or oral. Oral terms may be evidenced in writing. * Written terms set out in documents forming the contract for example, where a client and builder execute a copy of a standard form building contract, such as a copy of the FIDIC condition of contract setting out all of the terms they have agreed, or where, as is often the case in a contract for the sale of goods, all of the terms are set out in a letter of offer, accepted by the purchaser orally or by conduct. * Written terms contained in documents referred to (incorporated by reference) in the exchange of communications forming the contract * Oral terms agreed at a meeting or over the telephone. It is preferable for oral terms to be recorded (evidenced) in writing so that there can be no dispute about what was said, for instance by making and circulating a note of what was agreed. But failure to do this will not affect the validity of such terms, unless the contract is of a type whose terms must be made or evidenced in writing. 1.10.2 Implied terms Implied terms are those that are included in a contract even if the parties do not expressly refer to them at the time the contract is concluded. * Contract terms are implied by law or by statute if the contract is of a type in which such terms are ordinarily implied and the implication of those terms is not contrary to the express terms of the contract. For example, terms are ordinarily implied by the Sale of Goods Acts into contracts for the sale of goods, and by the Supply of Goods and Services Acts and law into contracts for work and materials or for services. * Terms implied to reflect the parties presumed intention if, having regard to the words used in the contract and the circumstances at the time it was concluded, they are necessary to give business efficacy to the contract or are so obviously a part of the contract that both parties would, if asked at the time, have said that they go without saying. For example, a contract to use a wharf will be subject to an implied term that it is safe for the ship to lie at that wharf. But a term will not be implied on this basis if it is inconsistent with the express words of the contract. * Terms may be implied by custom where the custom is a certain and general incident of a particular trade or place, and the use of the term is well known, reasonable and not contrary to law or to the express words of the contract. * Contract terms implied by course of dealing where the parties have contracted on the same terms on a number of previous occasions and they make another contract of similar type without expressly referring to those terms. 1.10.3 Exemption clauses An exemption clause is a contract term by which one party, usually but not invariably the party proposing the terms of contract, seeks to avoid or exempt itself from what would otherwise be its obligations or liability under the contract (an exclusion clause), or seeks to restrict or limit its liability in some way (a limitation clause).An exemption clause can work indirectly by, for instance, restricting the enforcement of obligations under a contract, or by making enforcement unusually onerous. Exemption clauses are commonly found in standard terms of business. For example, a seller of goods may seek to limit its obligations by providing in its standard terms that they form the whole agreement of the parties, and no terms are to be implied at law. The purpose of such wording is to exclude the implied terms of quality and title that would otherwise apply to the contract. A consultant provides in its terms of appointment that any liability, whether for default under the contract or in negligence, is limited to a specific sum. The purpose of such a provision is to cap the consultants potential liability to its client. Because exemption clauses exclude or limit what would otherwise be a partys obligations or liabilities under a contract, they must be clearly incorporated and clearly worded if they are to be effective. There are also various statutory controls over the effectiveness of such provisions, and, in a few instances, criminal sanctions are imposed on those who seek to include such clauses in their contracts. 1.11 Most Commonly Used Types of contract in UAE construction industry There are various types of conditions of contracts used all over the world. Most commonly used conditions of contracts in the past are FIDIC in Middle East JCT NEC in United Kingdom. In United Kingdom mainly JCT NEC conditions of contract is in practice in various forms. The conditions of contracts are listing the legal structure to be refereed to in case of any dispute or ambiguity arises. It also establishes a common basis to both the contractor and the client in understanding each partys commitments and rights against the other party. Understanding the rights and obligations are important prior to the agreement of a contract between the parties. 1.12 Key contract clauses used in condition of contract 1.12.1 Audit This clause typically outlines an owners right to perform reviews (audits) of contractor costs or records. Such clauses ordinarily outline what costs or records are subject to audit, when and under what circumstances. In cost plus contract this clause is very useful to client to restrict the overall project cost 1.12.2 Changes This clause is critical. This is the clause that allows the owner to direct changes to the work, including plans, specifications, and time of performance, means, and methods. Absent a change clause, an owner is precluded from making changes to the work. Of particular importance in this clause is whether the clause allows the owner to unilaterally direct changes to the work (in which case, if the contractor refuses to comply with the directives, they are in breach of the contract). Alternatively, the clause requires the owner and the contractor to mutually agree on the change (a bilateral change). On the other hand if there has been any discrepancy in specification or drawing this clause will help contractually to change this discrepancy with required adjustments. However changes can result positive or negative variation in construction industry. 1.12.3 Contractor Responsibilities This clause lays out, in general form, the duties, obligations and responsibilities of the contractor in performance of the work. This clause assigns specific risks to the contractor, including customarily the risk of adequate labor and equipment to accomplish the work within the required timeframe, the obligation to perform work safely, to perform work in strict accordance with the terms and conditions of the plans and specifications, and to be responsible for the work of subcontractors and suppliers, etc. This clause is very important in construction for clients points of view. As such client investing a large amount of money in the project so because of this clause he will get relief and guaranty for the works which has to be executed. 1.12.4 Delays This is, ordinarily, a risk allocation clause with respect to delays in the work. â€Å"Excusable delay† under a contract results in time extensions but no time related damages. That is, a contractors performance time is extended because of excusable delay situation, but the contract is not entitled to collect time extension costs nor is the owner entitled to impose late completion damages for this time. â€Å"Compensable delay†, on the other hand, results in both a time extension as well a time excusable and compensable to the contractor while contractor caused delay is the responsibility of the contractor (to either make up the lost time or pay the contractually stipulate late completion damages). Third-party caused delay (sometimes referred to as force majeure delay) is, most often, excusable and no compensable to the contractor. 1.12.5 Differing Site Conditions or Changed Conditions This clause normally provides an equitable adjustment to the contract in the event the contractor encounters a materially different condition at the site during performance of the work. This is the clause which will give relief to the contractor when he will get differ in site condition e.g. Non stop rain for few month. Differing site conditions are unforcing events no one can predict these events. In this situation this clause is very important in construction industry to restrict unnecessary claims 1.12.6 Dispute Resolution This clause customarily sets forth the mechanism to resolve disputes during the performance of the work. Most dispute clauses contain some form of a stepped resolution system. For example, the clause may require on site negotiation between project managers, followed by an appeal to project executives, followed by 3 days of mediation, followed by binding arbitration under a formal set of rules. Often, the location (jurisdiction) of the disputes resolution will be set forth. In construction industry there are several methods of dispute resolution like negotiation, mediation, Conciliation natural evaluation, adjudication, arbitration, and litigation. However each of then having its own framework to resolve the dispute. These are the primary steps of resolving the the disputes on claims in construction industry. 1.12.7 Force Majeure Some contracts contain a force majeure clause or a clause dealing with delays to the work caused by unforeseeable events beyond the control of both the owner and the contractor. Such clauses often provide lists of examples of force majeure events acts of God, acts of the government, civil disorder, acts of war, adverse weather, fires, floods, strikes, etc. Other contracts provide for such events in the excusable delay clause. In construction to get the relief to the parties involved in the contract from the unforeseen event. This will help to gain loss or expense due to unforeseen event. 1.12.8 Governing Law The contracts involve parties from differing locations with subcontractors and suppliers from even more locations. Accordingly, contracts often specify which law applies to a dispute, regardless of where the dispute is handled. 1.12.9 Indemnification To indemnify another is to protect them against loss or damage either by paying for the loss or standing in their place in the event of legal dispute. An indemnification clause in a contract typically requires a contractor to indemnify the owner against all loss resulting from contractor errors, omissions, accidents, third party property damages in construction industry. 1.12.10 Insurance This clause requiring the owners and contractors to furnish multiple insurance policies prior to commencing work, among which are the following: builders risk/all risk; workmans compensation; automobile, aircraft, and/or marine liability; general liability; bodily injury; broad form property damage; completed operations; personal injury; etc. Generally in UAE construction industry Third party insurance and professional indemnity insurance are covered in the contract document. 1.12.11 Late Completion Damages This clause specifies the damages for late completion. In general terms, there are two types of late completion damages actual and liquidated. Actual damages are those damages an owner actually suffers when a contract is completed late and may include loss of revenue, increased engineering, architectural or inspection services, increased financing costs etc. Liquidated damages, on the other hand, is a pre-agreed upon amount the contractor will pay the owner in the event the project is completed late due to no excusable delay cause-that is, due solely to the contractors fault. Such damages are typically expressed in terms of a daily cost and need not be proven as actually incurred if the project is completed late. 1.12.12 Limitation of liability In order to cap (or limit) a contractors risk from late completion damages, performance penalties, etc., under a contract, many contracts contain a clause limiting maximum liability to a percentage of the value of the contract. However this clause is very important UAE construction industry. UAE is fast growing country and maximum contracts are on lump-sum basis. Contractors have to bear all risk involved in the construction. 1.12.13 Order of Precedence This clause intended to provide guidance to both the owner and the contractor in the event of conflicting provisions. Typically, specifications have precedence over general provisions, and so on and so forth. The legal concept is to provide guidance to people on projects in the event there are two or more conflicting provisions relating to a topic. In UAE construction industry most preferable contract is FIDIC and the order of precedence used is Contract document, ant amendment to contract document, drawing, specification and Bill of Quantity. However if any disputes arises the above mentioned order is used to settle the disputes in construction 1.12.14 Owner Responsibilities Similar to a contractor responsibility clause, an owner responsibility clause ordinarily sets forth the obligations of the project owner, including adequate project financing, all required and necessary permits, appropriate site access, etc. These are the responsibilities covered in the contract document to run the project without any disturbance from the client/owner side. These clauses bound the owner in contractual framework to take any action during the execution of works 1.12.15 Payments This is key contract clause in terms of project cash flow. This clause sets forth how often the contractor is to be paid, in what manner, and what are the conditions precedents to the issuance of payment. In construction it helps the contractor to manage the finance before the commencement of project. 1.12.16 Quantity Variations The contracts contain estimated quantities to be installed. In the event as-bid quantity estimates vary substantially (+/- 10 percent or more) many contracts (both unit price and lump sum) contain a quantity variation clause which allows either the owner or the contractor to request a predetermination of the as-bid unit price on affected portions of the work. 1.12.17 Schedules A schedule clause typically sets forth the requirement for contractor scheduled , including format (bar chart vs. CPM), level of detail, submittal requirements, frequency of schedule updating, damages for failure to submit, delay or time extension analysis requirement, actions to be taken in the events of forecasted late schedule, etc. 1.12.18 Suspension of Work This clause habitually allows a project owner to suspend or stop all or some of the work, with or without clause. Such clauses normally provide for some adjustment to the terms of the contract in such events, including a time extension and payment of delay costs. However, recovery of time and cost limited by the terms of contract. Often, if the actual clause of the suspension order is something for which the contractor is responsible (i.e., unsafe work conditions, work not in compliance with contract requirement, etc.) no recovery time or cost is allowed. This clause gives the owner choice to delete the some or whole part of work with legal manner 1.12.19 Termination Almost all contracts have a provision allowing the owner to end, in whole or in part, performance of the work prior to project completion. There are, typically, two types of termination; termination for convenience and termination for default. Termination for convenience usually occurs when a project owner decides, for their own reasons, not to complete the project as designed. Such situations might arise if the owners needs change, if project financing fails, or if the underlying project economics change substantially. In such a circumstance, the owner may elect to terminate the contractors performance for the convenience of the owner and pay off the contractor in accordance with the terms of the clause. Termination for default arises only when a contractor is found to be in material breach of the contract, has been provided with a cure notice form the owner outlining the material breach, and has failed to remedy the breach in a timely manner. Usually the owner will terminate the co ntractor from the project and call upon the contractors financial guarantees to complete the work (i.e., letter of credit or surety bond). Some contracts also provide a contractor the right to terminate their participation in a project. Under certain carefully proscribed circumstances (such as, failure to make payments, bankruptcy of the owner, suspension of the work for more than a defined period of time, etc.) the contractor is allowed to terminate their own involvement in the project. 1.12.20 Time of the Essence/Time of Performance- Timely project completion is normally important, most contracts contain a clause stating that â€Å"Time is of the essence of this contract. â€Å"Such a clause must be included to make enforceable a time of performance clause and collection of late completion damages. Absent such a clause, the time of project completion is considered unenforceable. The time of performance clause, typically expressed either in work or calendar days after issuance of notice to precede, sets froth when the work must be completed and the consequences of failure to meet these dates. 1.12.21 Warranty A warranty clause, which ordinarily continues in existence for some specified period of time after project completion, guarantees the contractors work after project acceptance. It is not uncommon for warranty clauses to require a warranty for 1 year after project completion, during which time, if any portion of the project fails, the contractor is obligated to return to the project and make it right or agree to some commercial settlement of the issue. 1.13 Strengths and Weaknesses of contract in construction industry Various advantages and disadvantages in the usage of contracts. The contracts are imposing a better control over the contractors and always state the penalties for non-compliance. Punishment used as a tool for guidance of the projects for timely completion and it is not working always successfully. 1.13.1 Strengths * Firmly laid down rules and regulations Rules and regulations are made up to follow the instruction in the same way contract provides rules and regulation for the parties. It provides instruction to the parties what should have to be done at each stage of the projects. Such as health and safety requirement in document for each construction project. * Pre agreed procedural commitments Contract includes the procedure which should have to follow by the parties involved in it. It provides what should be done by the parties in the initial stage of the proj

The Classification And Formation Of Crystals :: essays research papers

The Classification and Formation of Crystals Introduction Purpose   Ã‚  Ã‚  Ã‚  Ã‚  My purpose of this experiment is to find out how crystals are formed and how they are classified. For a long time, I’ve been interested in crystals, so I’ ve decided this experiment would be perfect for me! Crystallography   Ã‚  Ã‚  Ã‚  Ã‚  The study of the growth, shape, and geometric characteristics of crystals is called crystallography. When the conditions are right, each chemical element and compound can crystallize in a definite and characteristic form.   Ã‚  Ã‚  Ã‚  Ã‚  Thirty-two classes of crystals are theoretically possible, almost all common minerals fall into one of about twelve classes, and some classes have never been seen. The thirty-two classes are grouped into six crystal systems, based on the length and position of the crystal axes. Crystal axes are imaginary lines passing through the center of the crystals. Minerals in each system share certain proportions and crystal form and many important optical properties.   Ã‚  Ã‚  Ã‚  Ã‚  The six crystal systems are very important to a mineralogists and geologists; specification of the system is necessary in the description of each crystal system. Isometric   Ã‚  Ã‚  Ã‚  Ã‚  This system comprises crystals with three axes, all perpendicular to one another and all have equal length. Tetragonal   Ã‚  Ã‚  Ã‚  Ã‚  This system comprises crystals with three axes, all perpendicular to one another; but only two are equal in length. Orthorhombic   Ã‚  Ã‚  Ã‚  Ã‚  This system comprises crystals with three mutually perpendicular axes, all of different lengths. Monoclinic   Ã‚  Ã‚  Ã‚  Ã‚  This system comprises crystals with three axes, all unequal in length, two o which are not perpendicular to another, but both of which are perpendicular to the third. Triclinic   Ã‚  Ã‚  Ã‚  Ã‚  This system comprises crystals with three axes, all unequal in length and is not perpendicular to one another. Hexagonal   Ã‚  Ã‚  Ã‚  Ã‚  This system comprises crystals with four axes. Three of these axes are in a single plane, proportionally spaced, and of equal length. The fourth axis is perpendicular to the other three. Some crystallographers split the hexagonal in two, calling the seventh system trigonal or rhombohedral. Formation of Crystals   Ã‚  Ã‚  Ã‚  Ã‚  Crystals are formed when a liquid becomes solid or when a vapor or liquid solution becomes supersaturated. Some substances tends to form seed

A Theological Perspective of the Clash of Civilizations Essay examples

Introduction On more than one occasion, President George W. Bush has described the terrorist attacks of September 11, 2001, as fostering â€Å"a monumental battle of good versus evil.† In this battle, there has been no doubt in his mind (or in ours) regarding who is on the side of good and who is on the side of evil. Though some have winced at the President’s use of such absolute moral terms to portray the tragic events of that fateful day, others have applauded his courageous use of such unfashionable discourse as entirely appropriate, even suggesting that it implies the demise of the cultural scourge of postmodern moral relativism. Another important way, not entirely unrelated, of interpreting what transpired on 9/11 is to explain the attack of Islamic extremists on the United States of America as a manifestation of a â€Å"clash of civilizations.† At the center of this way of looking at these unprecedented events has been an article and book both authored by the noted Harvard professor of political science, Samuel P. In the summer 1993 edition of the journal Foreign Affairs, Huntington argued that world politics was entering a new phase after the end of the Cold War, and that tensions between civilizations, as the highest cultural groupings of people, would dominate the global scene. He explains the article’s thesis in these words. It is my hypothesis that the fundamental source of conflict in this new world will not be primarily ideological or primarily economic. The great divisions among humankind and the dominating source of conflict will be cultural. Nation states will remain the most powerful actors in world affairs, but the principal conflicts of global politics will occur between nations and groups of different ci... ...vides a basis for that blaze, that vision, and that life. Let us pray and live it out with a sincere heart with a view to God’s glory in the restoration of humankind Solzhenitsyn, â€Å"A World Split Apart,† 59, 61. and the renewal of the earth in an age of a tremendous battle between good and evil and the clash of civilizations. Lord, make me an instrument of Your peace. Where there is hatred, let me sow love. Where there is injury, pardon. Where there is doubt, faith. Where there is despair, hope. Where there is darkness, light. And where there is sadness, joy. O divine Master, grant that I may seek not so much to be consoled, as to console. To be understood, as to understand. To be loved, as to love. For it is in giving that we receive; It is in pardoning that we are pardoned; And it is in dying that we are born to eternal life. Amen.

Managing Diversity in the Workplace

Many people believe that discrimination is a thing of the past. They acknowledge that discrimination in the workplace was a serious problem in earlier times. In the present times, there is already heightened awareness of the problem, as well as the significant legal and financial consequences, have eliminated most forms of discrimination.Aside from globalization, â€Å"multiculturalism† has become one of the buzzwords of the Information Age. Multiculturalism connotes diversity in culture and society. In realization of the diversity in American culture, multiculturalism has its roots in the things that separate people from each other. Varieties of multiculturalism go in different directions; but whether radical or liberal, whether emphasizing power or weakness and the distinct contributions of each ethnic group, multiculturalism keeps coming back to its roots in the word â€Å"difference†.The ideal of diversity, the mixing of things up, spreading the wealth, creating a n ew concept of â€Å"us†, never quite ensued rapidly. In relating to racial, ethnic and sexual identity, multiculturalism carved out discrete areas of high visibility but kept those areas self-contained. Since the middle of the 1990's, dissatisfaction with this situation has been widespread, especially as the very concept of race has been forcefully called into question. Black may have been beautiful in the 1960's, and powerful in the 1970's, but it has also become increasingly viewed by cultural historians as a social construct, one fixed in place only by racism itself (Cotter, 2001).As most of the people leading America's major institutions have grown up in segregated communities with segregated schools, they have had limited opportunities to interact with people from different cultures-people whose first language may not be English, or whose skin color is not the same as their own. Many of these leaders have internalized all the stereotypes about race, gender, sexual orient ation and ethnicity that are built into the structures of our society and our organizations.They are ill prepared for the heterogeneity which exists in most organizations today and will surely exist in all organizations tomorrow. The dramatic changes that are upon us are creating an imperative to consider real integration of all workers–not as a matter of social justice or civil rights, but as a necessity for survival (Cross, 2000, p. 2).Despite the fact that there are laws that inhibit, discrimination still exists in many corporations. Class-action discrimination lawsuits are still being settled every day to the tune of millions of dollars. For example, Texaco settled a $176.1 million racial discrimination lawsuit involving 1,400 employees;Ford Motor Company agreed to pay $3 million to settle allegations that women and minority applicants were discriminated against in the hiring process at several Ford plants; and Coca-Cola settled a racial discrimination lawsuit for $192.5 million. Currently, unsettled suits alleging workplace discrimination are pending at organizations ranging from Johnson & Johnson and BellSouth to the National Football League (George and Jones 2005, 341).In someone's place of employment, for example, what does it mean when individual differences are distributed unequally across organizational levels or among work functions? What are the implications of some members holding majority status while others are minorities in respect to representation with the organization?The daily work challenges faced by minority cultures or populations in organizations can range from having to deal with misunderstandings and lack of sensitivity on the one hand to suffering harassment and discrimination, active or subtle, on the other. In respect to race relations in the workplace, a Fortune magazine article once concluded: â€Å"The good news is, there's plenty of progress for companies and employees to talk about.†¦ But what often doesn't get s aid, especially in mixed-race settings, is how much remains to get done† (Mehta 2000, p. 182).A recent study revealed that when rà ©sumà ©s are sent to potential employers, those with white-sounding first names, such as Brett, received 50 percent more responses than those with black-sounding first names, such as Kareem. The fact is that such bias can still be limiting factors in too many work settings (Columbus Dispatch, 2003). Prejudice, or the holding of negative, irrational opinions and attitudes regarding members of diverse populations, sets the stage for diversity bias in the workplace.Such bias can result in discrimination that actively disadvantages individuals by treating them unfairly and denying them the full benefits of organizational membership. This means that even though organizations are changing today, people are still aware that most senior executives in large organizations are older, white, and male. There is still likely to be more workforce diversity at l ower and middle levels of most organizations than at the top.In seeing diversity, one common theme in some approaches is that â€Å"diversity is about all kinds of difference.† However, this view takes us down a dead-end road. Surely, the goal of management in general is just that: â€Å"managing all kinds of difference.† It is clear that what is   needed from a field that is called â€Å"managing diversity† are theories and practices that help organizations reduce discrimination and enable employees who are increasingly diverse by race, gender, sexual orientation and ability to work together effectively.Managers not only need to be competent in basic management skills, they need to learn how to apply those skills competently and comfortably when the employees in their charge are not like them. They need to know how to apply the organization's policies and practices equitably to all employees.When managers become aware of evidence of potential discrimination, they need to pay immediate attention and act proactively to address the potential problem and perhaps change the organization's policies and practices. The management and leadership implications should be summed up in the concept of managing diversity. R. Roosevelt Thomas Jr. (1992) defines this as the process of comprehensively developing a work environment that is for everyone, that allows â€Å"all kinds of people to reach their full potential.†To help guide others in managing diversity, he poses these questions: (1) â€Å"What do I as a manager need to do to ensure the effective and efficient utilization of employees in pursuit of the corporate mission?† (2) â€Å"What are the implications of diversity for the way I manage?† When all managers can answer these questions positively Thomas calls the organization â€Å"diversity mature.†In such organizations, there is a diversity mission as well as an organizational mission; diversity is viewed as a strat egic imperative and the members understand diversity concepts. Ultimately, Thomas & Woodruff (1999) considered the basic building block of a diversity-mature organization is to become the â€Å"diversity-mature individual†. According to Thomas & Woodruff, a â€Å"diversity-mature individual† is someone who can positively and honestly answer the nine questions posed in The Effective Manager 2.1:Are You Mature on Diversity?1.  Ã‚  Ã‚  Ã‚  Ã‚   Do you accept personal responsibility for improving your performance?2.  Ã‚  Ã‚  Ã‚  Ã‚   Do you accept personal responsibility for improving your organization's performance?3.  Ã‚  Ã‚  Ã‚  Ã‚   Do you understand yourself and your organization?4.  Ã‚  Ã‚  Ã‚  Ã‚   Do you understand important diversity concepts?Do you make decisions involving differences based on ability to meet job requirements? Do you understand that diversity is complex and accompanied by tensions? Are you able to cope with complexity and tensions in addr essing diversity? Are you willing to challenge the way things are? Are you willing to learn continuously?In a research reported by the Gallup Management Journal (December 2001), revealed that establishing a racially and ethnically inclusive workplace is good for morale. In a study of 2014 American workers, those who felt included were more likely to stay with their employers and recommend them to others. Survey questions asked such things as: â€Å"Do you always trust your company to be fair to all employees?†Ã¢â‚¬Å"At work, are all employees always treated with respect?† â€Å"Does your supervisor always make the best use of employees' skills?† they have gathered a conclusion that organizational culture of inclusivity counts both in terms of respect for people and in building organizational capacities for sustainable high performance.Thus, managers and business leaders today find that managing diversity makes good business sense as a strategic imperative, not ju st a legal and moral one. A diverse workforce offers a rich pool of talents, ideas, and viewpoints useful for solving the complex problems of highly competitive and often-uncertain environments. No doubt that well-managed workforce diversity increases human capital. If we are to succeed in helping our organizations and our society become more equitable, more open, more inclusive and more profitable, we must not fall into power struggles between the management and its subordinates.There is still no panacea that would eventually eliminate racial and gender biases, but in working together to the advantage of everyone will somehow dissolve the various barriers that impede productive output and understanding our fellowmen. This is because the success of an organization mainly lies on a common consensus that considers diversity to be an opportunity for everyone in an organization to learn from each other and harness each other’s cooperation in order to improve the quality of the pe rformance – as an individual, as a group and as a company.ReferencesColumbus Dispatch. (2003, January 17). Racism in Hiring Remains, Study Says. p. B2.Cross, E. Y. (2000). Managing Diversity–The Courage to Lead. Westport, CT: Quorum Books.Gallup Management Journal. (2001, December). The Most Inclusive Workplaces Generate the Most Loyal Employees. Gallup Group.George, Jennifer M. & Jones, Gareth R. (2005). Understanding and Managing Organizational Behavior, (4th ed.), New York: Prentice-Hall – Pearson Education Company.Mehta, Stephanie N. (2000, July 10). What Minority Employees Really Want, Fortune, pp. 181–186.Thomas, R. Roosevelt Jr. (1992). Beyond Race and Gender (New York: AMACOM), p. 10Thomas, R. Roosevelt Jr. & Woodruff, Marjorie I. (1999).Building a House for Diversity (New York: AMACOM).